加载单脊波导的微波色散特性研究

理论上分析了计算了所设计的加载ＬｉＮＢＯ３单片的单脊波导在微波Ｘ波段的色散特性，实验上测量了此色散特性，两者具有较好的一致性，并表明该波导实现了微波与光波的速度匹配而诚为宽带行波光调制器。     

微波系统的圆极化轴比测量精度分析

微波天线和馈源系统的圆极化测量轴比与测试方法、测试附件的传输及反射特性有关，本文讨论了失配微波系统的圆极化轴比测量精度的分析与计算方法，并针对工程中常见的一些情况进行了分析与讨论。     

离子电推进技术的发展现状与未来

离子电推进是最具代表性和技术成熟度的电推进技术类型之一。本文从放电室技术、离子光学系统技术、放电阴极和中和器阴极技术的优势、缺憾等方面,总结了离子电推进的技术发展现状。针对未来航天任务对离子电推进更大功率、更高比冲、更简系统等新需求,分析了传统离子电推进所面临的主要技术挑战,梳理出了环型离子电推进、双级加速离子电推进、自中和离子电推进、螺旋波放电离子电推进等创新离子电推进技术发展的未来方向。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

表面介质阻挡放电等离子体体积力实验

采用粒子图像测速(PIV)技术,在2200,4800,7300,14600Pa空气压力条件下,测量了高频高压表面介质阻挡放电(surface dielectric barrier discharge,SDBD)等离子体诱导流场.根据速度场和N-S方程求解了等离子体体积力分布,分析了空气压力和激励器电压对等离子体体积力影响.实验结果表明:相同空气压力时,激励器电压越高体积力越大.相同激励器电压时,体积力随空气压力升高减小.在体积力分布区域,体积力方向一致,较大体积力区域分布于体积力方向线上游,流场高速流动区域紧挨较大体积力分布区域,位于体积力方向线下游.     

One-to-one relationship between low latitude whistlers and conjugate source lightning discharges and their propagation characteristics

One-to-one relation with its causative lightning discharges and propagation features of night-time whistlers recorded at low-latitude station, Allahabad (geomag. lat. 16.05°N, L = 1.08), India, from continuous observations made during 1–7 April, 2011 have been studied. The whistler observations were made using the Automatic Whistler Detector (AWD) system and AWESOME VLF receiver. The causative lightning strikes of whistlers were checked in data provided by World-Wide Lightning Location Network (WWLLN). A total of 32 whistlers were observed out of which 23 were correlated with their causative lightnings in and around the conjugate location (geom. lat. 9.87°S) of Allahabad. A multi-flash whistler is also observed on 1 April with dispersions 15.3, 17.5 and 13.6 s^1/2. About 70% (23 out of 32) whistlers were correlated with the WWLLN detected causative lightnings in the conjugate region which supports the ducted mode of propagation at low latitude. The multi-flash and short whistlers also propagated most likely in the ducted mode to this station.     

高速走丝电火花线切割表面条纹的成因研究

分析了高速走丝电火花线切割加工时可通过电极丝空间位置稳定性的改善及选用具有良好洗涤能力的工作介质进行条纹消除的机理.并研究指出在大能量切割时,选用复合工作液以喷射的方式进行冷却,可以大大提高极间的洗涤性能,达到消除表面烧伤纹的目的.     

不同类型多级等离子体激励器诱导气流的力学特性研究

等离子体激励器通过产生的等离子加速气流,可以实现对流动的控制。单级等离子体激励器由于受到等离子体放电的物理限制,其控制作用较小;为了提高等离子体流动控制的效果,关于多级等离子体激励器的研究得到发展。采用图像采集和粒子示踪测速系统(PIV),对传统多级等离子体激励器和多级双极性等离子体激励器的放电现象以及气流加速进行研究,并通过流场速度分布计算等离子体激励器对空气产生的推力和吸力。结果表明:随着电压的升高,传统多级等离子体激励器产生的推力和吸力会逐渐减弱;而多级双极性等离子体激励器产生的推力和吸力均呈逐渐增强的趋势。     

空间微波交会雷达总体构想

结合我国载人航天工程未来发展的需要,分析了国外微波交会雷达技术的发展方向,提出了我国微波交会雷达的总体实施方案构想。     

燃烧室头部激励的等离子体强化燃烧特性实验研究

等离子体助燃是一种新型的强化燃烧技术，近年来受到国内外学者的广泛关注。本文开创性地研制了基于旋转滑动弧等离子体的强化燃烧头部，建立了某型航空发动机三头部燃烧室实验件的等离子体助燃实验平台，验证了该等离子体强化燃烧技术应用于型号发动机燃烧室的可行性。实验研究等离子体助燃在不同余气系数和不同输入电压条件下对平均出口温度、燃烧效率、温度分布系数以及熄火边界的影响。实验结果表明，与正常燃烧相比，施加等离子体助燃后的燃烧效率有明显的提高，在输入电压为U0=240V，余气系数为 α=0.8时，等离子体助燃的燃烧效率提高3.24%。实施等离子体助燃后，燃烧室出口温度分布场分布得到明显的改善，在富油工况α=0.8，出口温度分布系数减少39.8%。等离子体助燃输入电压越高熄火边界扩展程度越明显，相比于正常工况条件下，等离子体助燃U0=240V的熄火边界扩宽了7.34%。